Antique Link

Project Number: N983

| Questions about how to use this item? Click here to ask a question

This project sponsored by:

Description
Reviews

Instructions.

Open a Jump Ring and attach the 17" length of chain, followed by the 16" length of chain. Open another Jump Ring and attach the ends of these two lengths to this Jump Ring the same order that you attached them on the first side. Set aside.
Take the 26" length of beading wire and thread on one Crimp Tube and a Jump Ring. Take the wire around and back down through the Crimp Tube. Pull to cinch and crimp the tube closed with your Crimping pliers. Cut off the excess wire with your Side Cutters.
Start your beadwork.

Quantity	Item
10	3mm Swarovski Crystal Pearls
20	4mm Swarovski Crystal Pearls
7	5mm Swarovski Crystal Pearls
9	6mm Swarovski Crystal Pearls
5	8mm Swarovski Crystal Pearls

**Repeat this pattern from the bottom up to string the other half of the necklace

After threading on the last pearl, thread on a Crimp Tube and another Jump Ring. Take the wire around and back through the Crimp Tube. Pull to cinch, and then crimp the tube closed with your Crimping Pliers. Cut the excess wire off with your Side Cutters.
Go back to either of the Jump Rings that you threaded on your pearl strand. Open one slightly and thread on one end of the 22" length of chain. Tightly close this Jump Ring after doing so, and repeat this step for the other Jump Ring on the other side of the pearl strand.
Open another Jump Ring and thread on the Jump Ring that has the two lengths of chain on it - make sure that the smaller 3mm chain is in front, facing you. Now, thread on the Jump Ring that has the chain and pearl strand - making sure that the pearl strand is in front of the chain. Close this Jump Ring. Open another Jump Ring and use this to attach the Lobster Clasp to the Jump Ring that you just attached in the first part of this step.
Head over to the other side of the necklace, and just like before, open another jump ring and thread on the other Jump Ring that has the two lengths of chain - smaller chain in front - and then the Jump Ring that has the chain and pearl strand - make sure that the pearl strand goes in front. Close this Jump Ring and then make a chain with the remaining Jump Rings, attaching to the Jump Ring that united the two Jump Rings on this side.
Make sure that all of the Jump Rings are closed securely, and that the Lobster Claw Clasp faces the correct way. Done!

There are no reviews for this product!

Buy Project Components

Seamless Crimp Tube Bead 2x2mm Sterling Silver (10-Pcs)

$1.22

.015" Silver Plated 19 Strand Beadalon Wire (15 Feet)

$18.25

Lobster Claw Clasp 12x7mm Antique Silver Plated (1-Pc)

$0.43

Triangle Rolo Chain 3mm Antique Silver Plated (Priced per Foot)

$1.62

Cable Chain 7mm Antique Silver Plated (Priced per Foot)

$4.16

Double Link Chain 4mm Antique Silver Plated (Priced per Foot)

$3.35

Round Open Jump Ring 5.5mm Antique Silver Plated (100-Pcs)

$3.76

Swarovski Crystal Pearls 5810 3mm Platinum (10-Pcs)

$0.80

Swarovski Crystal Pearls 5810 5mm Platinum (10-Pcs)

$1.10

Swarovski 5810 8mm Platinum Round Crystal Pearl (10-Pcs)

$4.40

Recently Viewed Items

Top