1) Take one of the Earwires and thread on one of the Fire Polished Donuts.

2) With your fingers, pull the back of the earwire up so that you are straightening out the bend in the Earwire slightly (You are doing this to fit the smaller holed Spiral Bead over the bend in the wire) . Now, thread on one of the Spiral Beads. Gently bend the wire back to it's original shape.

3) Thread another of the Fire Polished Donuts onto the wire, and then use your Chain Nose pliers to hold the Earwire while you slide on one of the Plastic Safety Nuts (Tip: Hold your Chain Nose Pliers on the Earwire not far from the end of the Earwire. This reduces the chance of bending your Earwire out of shape when you apply pressure fitting the Earnut on.)

4) Reapeat all steps to create the other earring.

Quantity of Items Needed
2 Bead Flat Spiral 8mm Pewter Antique Silver Plated (BD2050)
2 Safety Ear Backs (EN326)
2 Ear Wire Fish Hook with Dapped End 42mm Sterling Silver (ER615)
2 Czech Fire Polished Donut 4x7mm Jet (GD4398)