1) Take one Headpin (HP258), and thread on one Tear Drop Bead (DR6398). With your Chain and Round Nose Pliers, make a wrapped loop with the remaining Headpin wire, making sure to attach the loop to one of the loops on the filigree before wrapping and closing the loop completely.

2) Look at the back of the filigree with the wrapped loop attached. Trace an imaginary line from the loop that the wrapped loop is attached to, to the loop directly above it. Open the connector loop on the Crystal Stone Post (EP700), and attach this connector loop to that loop on the back of the filigree directly above the loop that has the wrapped loop around it.

3) Repeat all of these steps again to create the other earring.

Quantity of Items Needed
2 Swarovski Tear Drop Beads 5500 9x6mm Jet (DR6398)
2 Earring with 4mm Cubic Zirconia Sterling Silver (EP700)
2 Swarovski Filigree Bead 60860 Sterling Plated Jet/Crystal (FG8298)
2 Head Pin - Bali Style 2" 22 gauge Sterling Silver (HP259)
2 Ear Backs Medium 5.5mm Sterling Silver (EN905)