1) Cut two 3" lengths of wire. With one length of wire, thread on a Siam Round, followed by three Fern Green Bicone Pendants. Repeat this pattern four more times and end the pattern with another Siam Round.

2) Take the wire from one side of the loop and bend it straight up into a 90°. Wrap the wire from the other side of the loop around the bent wire and then trim off the excess wire. With the bent wire, form a medium sized simple loop.

3) Open the connector at the base of one of the earwires with your Chain Nose pliers and attach this to the Simple loop that you just created in the previous step.

4) Repeat all steps to create the other earring.

Quantity of Items Needed
24 Swarovski Crystal Bicone Beads Pendant 6301 6mm Fern Green (CP6291)
2 Lever Back with Shell & Loop Silver Plated (LB201)
10 Swarovski Round 5000 Bead 4mm Siam (RB4008)
6" Length of Round Wire 24ga Dead-Soft Sterling Silver Filled (SF124)